Ok so I am a bit of a Rat Race freak, but everytime I load the layout and after one spin, I get VTP and a terrible alarm, tried clicking long term meters, but still don't work. Any ideas please? Thank you all!!
10 replies to this topic
#1
Posted 10 September 2017 - 08:35 PM
BANNED ACCOUNT DELETED
#2
Posted 10 September 2017 - 08:48 PM
Ok so I am a bit of a Rat Race freak, but everytime I load the layout and after one spin, I get VTP and a terrible alarm, tried clicking long term meters, but still don't work. Any ideas please? Thank you all!!
Runs perfect in mfme v5.1.
#3
Posted 10 September 2017 - 10:21 PM
Open the config window and were it says triacs tick the meters box and restart.
Hold the bells mate.
#4
Posted 13 September 2017 - 09:26 AM
Hi Hitthesix, alarm still goes off in MFMEV5, options to click meters are shaded out. Thanks to TommyC for the solution, although layout is a little sluggish. I am playing Pete Walton's layout of Rat Race, what is the best emulator to play this on please? Many thanks.
BANNED ACCOUNT DELETED
#5
Posted 13 September 2017 - 12:51 PM
Click on design,then edit mode and then the configuration tab you should then be able to do what Tommy C says above.
The latest emulator is v5.1.
The latest emulator is v5.1.
Edited by wearecity, 13 September 2017 - 12:53 PM.
#6
Posted 13 September 2017 - 03:47 PM
Open the config window and were it says triacs tick the meters box and restart.
Hi mate
Not downloaded this on the new emulator and saw the post and thought Mmmm.
As I could never get this to run in the original emulator.
I still can't get it going in this one either.
Il try another version but all the boxes are ticked.
Jay
#7
Posted 13 September 2017 - 03:59 PM
Try this version by Pandy.
Also Petes working now.
Attached Files
Edited by wearecity, 13 September 2017 - 04:07 PM.
#8
Posted 13 September 2017 - 04:27 PM
Try this version by Pandy.
Also Petes working now.
Many thanks mate
Will do.
Jay
#9
Posted 13 September 2017 - 04:35 PM
Try this version by Pandy.
Also Petes working now.
Both work a treat.
What is the problem then with the other versions??
Comes up as a vp meter alarm or something
Jay
#10
Posted 13 September 2017 - 04:43 PM
After changing the display port under configuration to Meters, I reset the ram. It gives you a couple of options upon reboot, hit start and that's that.
Edited by wearecity, 13 September 2017 - 04:43 PM.
#11
Posted 13 September 2017 - 09:17 PM
Haha I said triacs,was display port i meant as wac said.
Hold the bells mate.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users