1 reply to this topic

[loopy]

On a previous thread I detailed how an issue with a Barcrest machine was sorted so it can be booted up however the machine is throwing a Coin Mech Err 10 error and it won't clear.

 

I have tried a procedure where I let it boot through to "Read Meters" then power off, discconnect the coin mech (and SR5), hold it upside down for 5 seconds and put it all back.  This didn't work.

 

I have tried to put the rotary switch on to setting E then press the program button (the LED should turn red) then switch the dial back to the origianal position.  None of this worked... the LED didn't even turn red.

 

I've tried shouting at it and that didn't work either.

 

Please is there any advice on what to do to clear the Coin Mech Err 10?

[FruitBash]

The "turning it upside down for 5 seconds" method is a DES coin mech trick. Do you have a DES mech installed?

 

Also, are you certain there is not a coin stuck inside the acceptor?

 

Cheers!