Barcrest mpu5 paying out too much
Started by mrrix, Jun 24 2017 09:19 PM
6 replies to this topic
#1
Posted 24 June 2017 - 09:19 PM
Hi guys and girls really stumped by this so hoping someone can help me out! Have barcrest rampage machine 10p £5 pays out far too much and I mean put £5 in and get £30 out over and over. It's on 78% and shows no errors at any point, even tested the mpu5 battery and it's 3.2 volt so think that's fine. Any ideas please just want it to play normal (no it's not on test). Thanks
#2
Posted 25 June 2017 - 11:04 AM
It can take a huge number of plays from a reset for some machines to start properly paying to percentage.
#3
Posted 26 June 2017 - 03:24 PM
Thanks for the reply, yes I know it can take a while but it really does keep paying. Worst case it takes £3 rolls in a winner and gives me £5-£15. Don't wanna get rid of it as it's a good game when playing properly. Any ideas?
#4
Posted 26 June 2017 - 03:30 PM
If there's a chance it is a faulty game chip can anyone burn me a new set please?
#5
Posted 26 June 2017 - 03:35 PM
Sounds like the RAM could be screwed. Try reseting the RAM from within test mode and see how it plays then.
Project Amber 2 - Coming Soon
#6
Posted 26 June 2017 - 05:21 PM
Thanks will try and check back with results
#7
Posted 27 June 2017 - 12:39 AM
I found that when i first reset ( ram cleared a machine ) it paid out well for a while then settled down, might be a ploy from the machine to entice players.
If this is the case it will settle down , just may take a few goes. keep an eye on the real time %
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users