17 replies to this topic

[vectra666]

Thought that'll get members looking, dirty pervs lol

Anyways i'm talking about globals Club Spotted dick

I've loaded the roms in and there appears to be 3 sound roms whether they're all needed i don't know but i get the reels to spin after a ram clear etc but they re-initialize about five times before throwing up a reel error 12345 in the alpha can someone who knows please try and sort it out so i can maybe start a classic/dx of this  also i think the hi lo reel should be 12 not 16 steps as in 1-12

thanks in advance Vectra666 

Attached Files

•  1 Club Spotted Dick Wip.zip   2.9MB   1 downloads

[vectra666]

i think i have lift off, place the above roms in mattys storm force as that is a global clubber, firstly i was getting reel error5 then i added a "1" in the opto tab and the hi lo reel stopped where it should and the machine finished initializing now i'm getting jumbled up sounds  

Attached Files

•  Untitled.png   434.05KB   0 downloads

[vectra666]

too me it looks a bad sound rom dump as the bin sound rom is all over the place, where as the other two sound like a completely different machine. off to search the net for correct soundies 

[prizeguy2005]

loved the awp of this one on £5 could streak well

[vectra666]

right finally sorted it, like a tit i thought this was the big brother of the awp spotted dick but noooooo!!!  well it is in a way but the theme is based on a old pub pirate theme with dogs, didn,t realise what stand and deliver had to do with spotted dick but looked at the flyer and its there so onto the layout next 

[Matty.N]

The reels on some global machines are funny buggers, had to have help off Wizard to get it booting.

[Reg]

The reels on some global machines are funny buggers, had to have help off Wizard to get it booting.

 

Reels work fine on this one...

 

...this is a poor DX, so looking forward to seeing a good one, flyer was not wonderful.

 piccy.png   1.87MB   1 downloads

[vectra666]

 

Reels work fine on this one...

 

...this is a poor DX, so looking forward to seeing a good one, flyer was not wonderful.

piccy.png

ahh i see the flyer was a bit shitty, don't suppose i can "borrow " the reel bands could I??

i got mine from spa's googledrive thingy unless anyone else has a higher res one, i thought samson81 had one which he uploaded many moons ago of which i can't find now.

Anyways onto my version made good progress tonight the sounds are correct and the reels spinning as they should, not found the coin in lamp and the hi lo lamps yet but worked out the buttons other lamps etc here's the flyer i have

 

 

edit to add again can i borrow the bands but just for number/symbol reference as i see they're not the correct symbols.

Attached Files

•  Untitled.png   655.28KB   0 downloads
•  Global - Spotted Dick resized.png   1.08MB   0 downloads

Edited by vectra666, 07 March 2017 - 10:21 PM.

[Reg]

Here you go...

 

 Bands.rar   250.01KB   3 downloads

Edited by Reg, 07 March 2017 - 10:32 PM.

[vectra666]

thanks finally reg can you tell me how to get it to 30p/£250 what dip switches or checkboxes are needed please

[Reg]

Hi is 150

Lo is 209

Coin is 522

Switch 25 and 27 checked.

[vectra666]

thanks again wokrs perfect now lol i was after the hi lo band lamp if possible then i'll leave you alone ha ha

[Reg]

Try 276.

Now can you please tell me how to drill square holes for my MFME keyboard !

[altharic]

Try 276.

Now can you please tell me how to drill square holes for my MFME keyboard !

Drill smaller round ones and use a needle file to square them off.

[Reg]

Thank you - I'll look into that.

 

Cheers.

[gemini17]

 

Reels work fine on this one...

 

...this is a poor DX, so looking forward to seeing a good one, flyer was not wonderful.

piccy.png

Looks fantastic

 

Never knew there was a clubber

 

Jay

[vectra666]

Try 276.
Now can you please tell me how to drill square holes for my MFME keyboard !

I'd use a large hammer and a 6 inch nail then get a hack saw and cut a rough looking square. It would look completely shit but I'm sure it'll still do the job lol
Thanks for your help on this

[TommyC]

Drill small hole the cut with a jig saw,easiest thing to do.