Jump to content


Photo
* * * * - 9 votes

Layout DIY fixes


  • Please log in to reply
556 replies to this topic

#541 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 7374 posts

Donator

Posted 24 February 2018 - 03:41 PM

one's i'v found and got working are-

 

Stardust £10/£15 classic tick hopper 1 in configuration

the streak £25 classic - needs both hoppers unticking in config to remove constant hopper noise as with a few or a lot of other scorp4 machines with this noise, other than that all fine this end


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#542 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 7374 posts

Donator

Posted 24 February 2018 - 03:49 PM

continuing from above post cause can,t edit for some reason

pcp spot on by me - all fine this end but will be enlarging layout for mfme6 at some point!!

stars n bars - fine

supertwo - fine

to re-align the reels if out you goto configuration and change the reel/ band offset a bit


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#543 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1072 posts

Posted 24 February 2018 - 06:36 PM

Here is another Jpemu converted layout.

 

Pinball Wizard 1280DX by Pook, up until now, we had a 1024 DX for MFME, so was worth converting IMO, as we can all now play above 1024.

 

Vec's is yours good enough for you to make a 1280 or higher res v6 DX from at some point?



#544 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1072 posts

Posted 24 February 2018 - 06:37 PM

Here is another Jpemu converted layout.

 

Pinball Wizard 1280DX by Pook, upto now, we

 

Vec's DX for MFME is good but is at 1024 (Vecs good enough to make a 1280 or higher res v6 DX from?), so worth converting IMO.



#545 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1072 posts

Posted 24 February 2018 - 06:37 PM

Here is another Jpemu converted layout.

 

Pinball Wizard 1280DX by Pook, upto now, we

 

Vec's DX for MFME is good but is at 1024 (Vecs good enough to make a 1280 or higher res v6 DX from?), so worth converting IMO.

Attached Files


Edited by wearecity, 24 February 2018 - 06:40 PM.


#546 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 7374 posts

Donator

Posted 25 February 2018 - 10:23 PM

not sure if its been done but here's ross's Italian Job now paying out correctly, also put new alpha display in and reel gradiented the reels

does anyone have a hi res flyer of this and could do with a spruce up


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#547 eyleyro

eyleyro

    fur face

  • Bronze Supporters
  • 141 posts

Posted 01 March 2018 - 08:56 AM

Ok,

No reply to above but turns out that it didn't appear as hard as it looked.  I post the following here in case is useful to others - like me - without the technical knowledge of the oldskoolers.  Please take with a pinch of salt, I have tested and fixed by playing them to the best of my ability, no idea how to use the doors or test mode.  This can take some time when a machine only spits out a feature every £50 with no feature board then kills you on the first high/Low :-(

 

Rows in red have partial fixes or have stumped me completely.  Rest should be ok unless otherwise noted.  Happy to receive any corrections or additions to the below.

 

Still have another 88 machines with varying errors, but will leave those to the experts and hoover up as and when, know your limits as they say!

 

edit: forum mangled it, attaching instead.


Edited by eyleyro, 01 March 2018 - 09:01 AM.


#548 eyleyro

eyleyro

    fur face

  • Bronze Supporters
  • 141 posts

Posted 01 March 2018 - 09:13 AM

Grrr, can't edit the above post again to add attachment.  Also, forum doing very strange things for me; it shows the last update on this thread as mine on 24/02 when I click the thread, but when I start to type a reply it says there are 7 replies which, if I click, I can see.  If I go back into the thread later on, the last post appears to be mine again, very strange.

Attached Files


Edited by eyleyro, 01 March 2018 - 09:14 AM.


#549 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 7374 posts

Donator

Posted 18 March 2018 - 05:31 PM

not necessarily a fix but Indiana Jones the 20p input was incorrect, for tokens the button number should be no.76 and meter3-1 in configuration  


The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#550 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1072 posts

Posted 13 April 2018 - 09:39 AM

Few more, since the later emulators have been released.

 

Firstly, thanks to Zoro 29 over at The MPU Mecca for spotting the problem.

 

MPU 5 King Kerching, needs the datapak under the configuration screen set to no

 

Go into design mode, by pressing CNTL E, then click on configuration and change DataPak from loopback to no. Come out of edit mode by pressing CNTL E again and close the configuration screen down and press CNTL R to reset the machine.

 

Others that require a change under the configuration tab.

 

MPU5 Show Me The Mummy, requires hopper setting to None (I assume the correct emulation option) or Serial, to avoid the constant hopper motor and payout sounds. Again reset the machine, you will get an on/off alarm, once or twice after loading the layout again, but it will clear.

 

Scorpion 4 Club Pink Panther 1024 DX by Vecs, needed the hoppers uncheck, otherwise constant hopper motor and payout sounds.



#551 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1072 posts

Posted 13 April 2018 - 10:02 AM

UPDATE.. Thanks to Wizard for info.

 

MPU5 Show Me The Mummy, requires hopper setting to Serial for correct emulation, to avoid the constant hopper motor and payout sounds. Again reset the machine, you will get an on/off alarm, once or twice after loading the layout again, but it will clear.



#552 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 7374 posts

Donator

Posted 13 April 2018 - 11:29 AM

A lot of scorp4 layouts will need the above doing like pink panther layouts
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#553 TommyC

TommyC

    Layout Designer

  • Layout Creator
  • PipPipPipPip
  • 1975 posts

Posted 13 April 2018 - 11:37 AM

I have dealt with these issues whilst updating my layouts i will amend the downloads once im done :)
Hold the bells mate.

#554 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1072 posts

Posted 13 April 2018 - 01:30 PM

A lot of scorp4 layouts will need the above doing like pink panther layouts

 

 

Way back near the start of this thread, I did a list of machines, that can have both hoppers unchecked.

 

Around The Board in 40 days

 

Bankety Bank, Bedazzled, Big Blaster,

 

Cabin Fever, Cash On The Lash, Chavvy Chase,

 

Cop The Lot, Coronation Street, Deal Or No Deal (the original machine)

 

Diamond Mine,  Doctor Do$h, Evolution,  Fever

 

Golden Balls, Golden Grid, Golden Winner, Happy Notes

 

High 'N' Mighty, Hilowarth, Hissing Quid, Hit Shot

 

I'm a Celebrity Get Me Out Of Here, Jumpin' Jack Cash, Lockbuster,

 

Never Mind The Jackpots, Pony Express, Reely Crazy

 

Rovers Return, Tubular Bells.

 

I guess there may be others by now.



#555 exclaret

exclaret

    Junior Member

  • Silver Supporters
  • 59 posts

Posted 13 April 2018 - 02:40 PM

Thanks for the info, this is a great thread.



#556 wearecity

wearecity

    MFME v whatever the next version number user.

  • Gold Supporters
  • 1072 posts

Posted 13 April 2018 - 03:58 PM

Some more.

 

You may have some already done, if you have for instance downloaded Ploggy's updates.

 

All Scorpion 4, all need both hoppers unchecked.

 

Casino Crazy Fruit Gold, Club Bobby Dazzler, Club Cash "L" Vania,

 

Club Cashraker, Club Cluedo, Club Cool Jewels

 

Club Gladiator, Club Pots Of Gold, Club Red Dragon, Club Suits You Sir,

 

Fruit Frenzy, Jack The Kipper, Monopoly,

 

Pink Panther, Pot Shot, Pots of Gold,

 

Return of the Count, Ronnie O Sullivan Snooker Tournament



#557 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 7374 posts

Donator

Posted 13 April 2018 - 08:30 PM

my layouts re-uploaded to correct hoppers

 

hissing quid 1024wdx

club gladiator

club suits u sir

club pots of gold/ pots of gold £25

monopoly hot property £5

 

if there's anymore of my layouts that need re-uploading, which i expect there's a fair few please feel free to list them and i'll amend the downloads 

also added v6.1+ to the end of the download titles


Edited by vectra666, 13 April 2018 - 08:31 PM.

The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users