3 replies to this topic

[andr001967]

Hi all !!!

 

I am sure this has been covered already but i was unable to locate it

 

I have just purchased a new windows 10 laptop and when i run MFME 9.4 the display of the machine is split into 2 and i am unable to view the reels,does anyone know of a fix for this prob ????

 

THANKS ALL

andr001967

[No1Stoney]

If you mean the machine is chopped off half way down so you cant see the bottom, then you either need to change your screen resolution to a higher one or download a smaller sized layout. All 1024 DX/classic layouts should fit on any screen if you cant change your res any higher.,

[Magz]

In 3.2 you can press F9 to take the meters off, this can help a bit...

 

Sorry, missed that you were in 9.4.

 

Yeah. There's not much you can do other than increase the screen resolution...

Edited by Magz, 09 February 2016 - 06:46 PM.

[vectra666]

what were you playing??? also found if you move the toolbar from the bottom to the far right it gives an extra inch. even some of my 1024dx's if played on partners lappy the buttons are below the screen, maybe due to me making my layout as big as i can technically produce with lappy.