Hello from a Newbie!

Hi there!

Im in the process of building my first bartop arcade machine. Originally I planned on making it a gaming machine, MAME, Steam, SNES etc but now considering adding classic UK fruit machines from my childhood

Ive found a few and they are awesome, now just have to try and figure out how to run them seamlessly from BixBog and map the controls to my control panel buttons, some of which are mapped to joypad controls, some to key presses.

Having a slight problem with Smash & Grab (http://www.fruit-emu...h-grab-1600-dx/) in Version 5 it works perfectly, but when saving out the new layout and then running it in Version 6 the lights on the reels are in the wrong place....any ideas?

Nat.

The reel lamp numbers are configured differently between emulator versions.  Use this version instead, mate.  Welcome to the forums.

Edited by ploggy, 21 March 2018 - 10:28 PM.

Use this one instead.  The layout above this post has the wrong meter settings.  I would edit the one layout above, but the time limit for editing the post is over unfortunately.

Edited by ploggy, 22 March 2018 - 12:36 AM.

Yes it's because the Reel Lamp Offset X & Y were removed from v6, and this just happened to be a machine where Reel Lamp Offset X was set to 1.

The Reel Lamp Custom checkbox replaced the need for the offsets.

thanks guys!

Welcome to the forums nat,

tell us about your project, do you have any pics ?

Hi and Welcome.