Jump to content


Photo

MPU5 note error - serial note mech missing


Best Answer supercom, 23 January 2018 - 12:12 AM

Hopper top up, job done! Go to the full post


  • Please log in to reply
No replies to this topic

#1 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 22 January 2018 - 07:50 PM

Hi all,

Is anyone here able to assist with an MPU5 issue? It's a Rainbow Riches on £70. It's got an old Jpm connected to it but think it's broken - can anyone advise if it can be disabled at all without removing the loom wires? Been into test and bnv key comes up with the six 0's. Tried inputting the correct key but comes up non responsive. I only work on new machines so in the dark with older tech... Any help appreciated.

#2 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 22 January 2018 - 07:58 PM

what note acc is it


.._-=It`s not a problem only a challenge =-_..

#3 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 22 January 2018 - 08:08 PM

JPM - EBA-22-PB2

#4 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 22 January 2018 - 08:08 PM

JPM - EBA-22-PB2

#5 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 22 January 2018 - 08:19 PM

JCM EBA. Ill will have to dig out my paper work. As I cant think what the setting are to reset set the bnv key.


.._-=It`s not a problem only a challenge =-_..

#6 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 22 January 2018 - 08:30 PM

https://www.eurocoin....pdf?download=1


.._-=It`s not a problem only a challenge =-_..

#7 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 22 January 2018 - 08:40 PM

Cheers impact, the acceptor boots up then shuts down again and comes up that it's missing. I'll have a fiddle with it later, is there a way of can be disabled altogether in test?

#8 fruitsnappa

fruitsnappa

    Part of the furniture

  • Regulars
  • 1304 posts

Posted 22 January 2018 - 08:47 PM

Unplug the loom and set BNV to 000000 if memory serves



#9 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 22 January 2018 - 09:00 PM

Have you try topping the hopper up. Cant remember us doing that snapper been so long since dealing with EBA`s. I hate UBA/EBA   


.._-=It`s not a problem only a challenge =-_..

#10 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 22 January 2018 - 09:39 PM

Cheers gents, will have a go a bit later...

#11 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 22 January 2018 - 10:11 PM

Hopper top up, job done!

#12 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 22 January 2018 - 10:23 PM

Good Man


.._-=It`s not a problem only a challenge =-_..

#13 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 23 January 2018 - 12:12 AM   Best Answer

Hopper top up, job done!

#14 supercom

supercom

    Newbie

  • New Members
  • 22 posts

Posted 23 January 2018 - 12:13 AM

Sorry for duplicate posts, the phone screen has got water on it and doing all sorts of crazy things. Thanks for your help all




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users