4 replies to this topic

[satans_creation]

I have got this quite cheap, I have spent some time repairing and soldering.

 

Now working just fine but need help on last couple of things please

 

There are serveral bulb holders on the top left that refuse to work.....

 

Also it will not accept any coins whatsoever, tried all coins including some older coins.... Please help me work out what the problem is.

 

[richy1976]

On the coin accepter is a flap with a spring on, spray some polish on a cloth & give it a good wiping under the flap.

Also the y chute above the coin mech (if it has the circuit boards on) there are sensors on there as well.

[satans_creation]

Hey the shoot does have sensors, I have tried cleaning them and put it back together. I will clean the coin mechanism like you said and report back.

Thanx Shane

[satans_creation]

Hello I tried cleaning the coin mech like you said but it's still doing the same.

While I was there I checked all connections and seems ok.

Here is the coin mech in the machine.

[dave t]

nice machine did you get it sorted?