7 replies to this topic

[cardie]

Right I have managed to acquire the ROMs for the machine I rencently picked up 'Stop the Clock' by BAS

 

It uses the Project Coin PC92 board which im guessing is an older version of proconn.

 

 

Im trying to get it to run in any emulator as the sounds upload straight away.

 

I can get it to boot... but I either get reels turning half way then juddering while one spins forever

 

Or I get no reel movement and just the POP on the 7 segs!

 

I cant find any of the emulators that I have to run it properly! Anyone any ideas?

[captainhaddock]

Try loading the roms in MFME 2.1 and put a check box on button 38 - save the dat and gam files and restart the emulator - it should run in test mode.

[cardie]

Tried that, boots up a lot quicker, all 3 reels spin 1 and 2 do a full turn and stop and 3 just carries on. Doesnt stop or give any errors.

 

 

Ticked 39 and it went into test mode, cant get it in gameplayt mode though

Edited by cardie, 16 April 2014 - 03:51 PM.

[captainhaddock]

try this - it sort of works - the reels judder during play for some reason ...

Attached Files

•  stoptheclock.zip   273.96KB   7 downloads

[Guitar]

Tried that, boots up a lot quicker, all 3 reels spin 1 and 2 do a full turn and stop and 3 just carries on. Doesnt stop or give any errors.

 

 

Ticked 39 and it went into test mode, cant get it in gameplayt mode though

 

Try different flag settings. Change the flag number on each reel from 0 to 1, then reset and see what happens, if it works, great. If not try chnaging all to 2, reset and see what happens. you can set any value from 0 to 4 from what I remember. If none of them work its possibly an emulation issue.

 

You can also try inverting the opto's and seeing if that helps.

Attached Files

•  ReelSettings.png   22.21KB   1 downloads

[launton]

I'll scan and stitch the reel bands for you tomorrow and pm you the jpg's mate. 

[launton]

Bands here

Attached Files

•  stop_the_clock_reel_bands.zip   48.22MB   10 downloads

[cardie]

Right I seem to be getting somewhere with it but I need to get it to take coins, so far ive tried all the different settings for the coins but non of them seem to work!